Testování a zkušenosti s Luckfox-Pico-Mini-B, zapůjčil Tomáš Červený.
Luxfox-Pico-Mini-B

Luxfox-Pico-Mini-B

Nastavení se dělá takto: Moje IPv4 adresa na PC je 192.168.120.235, IPv4 adresa Luckfox-Pico je 172.32.0.70.
na PC
root@pt3610:/home/jirka# ip a a 172.32.0.100/16 dev enx66843bafbd67
root@pt3610:/home/jirka# echo 1 >/proc/sys/net/ipv4/ip_forward
root@pt3610:/home/jirka# iptables -t nat -A POSTROUTING -o enp0s25 -s 172.32.0.70 -j SNAT --to 192.168.120.235
root@pt3610:/home/jirka# ssh pico@172.32.0.70
na Luckfox-Pico default gateway
pico@luckfox:~$ sudo ip r a 0.0.0.0/0 via 172.32.0.100
Pro provedení upgrade systému a instalaci balíků je potřeba přidat velikost tmpfs v adresáři /run, jinak to nechce fungovat (viz první řádek výpisu dále).
Jinak to hází chybu:
Failed to reload daemon: Refusing to reexecute, not enough space available on /run/systemd. Currently, 10.3M are free, but a safety buffer of 16.0M is enforced.
Zvětšení /run a upgrade systému
pico@luckfox:~$ sudo mount -t tmpfs tmpfs /run -o remount,size=20M
pico@luckfox:~$ sudo apt update
pico@luckfox:~$ sudo apt list --upgradable
Listing... Done
alsa-ucm-conf/jammy-updates 1.2.6.3-1ubuntu1.12 all [upgradable from: 1.2.6.3-1ubuntu1.8]
apt-utils/jammy-updates 2.4.13 armhf [upgradable from: 2.4.11]
apt/jammy-updates 2.4.13 armhf [upgradable from: 2.4.11]
base-files/jammy-updates 12ubuntu4.7 armhf [upgradable from: 12ubuntu4.4]
bash/jammy-updates,jammy-security 5.1-6ubuntu1.1 armhf [upgradable from: 5.1-6ubuntu1]
binutils-arm-linux-gnueabihf/jammy-updates,jammy-security 2.38-4ubuntu2.6 armhf [upgradable from: 2.38-4ubuntu2.3]
binutils-common/jammy-updates,jammy-security 2.38-4ubuntu2.6 armhf [upgradable from: 2.38-4ubuntu2.3]
binutils/jammy-updates,jammy-security 2.38-4ubuntu2.6 armhf [upgradable from: 2.38-4ubuntu2.3]
bsdutils/jammy-updates,jammy-security 1:2.37.2-4ubuntu3.4 armhf [upgradable from: 1:2.37.2-4ubuntu3]
ca-certificates/jammy-updates,jammy-security 20240203~22.04.1 all [upgradable from: 20230311ubuntu0.22.04.1]
cmake-data/jammy-updates 3.22.1-1ubuntu1.22.04.2 all [upgradable from: 3.22.1-1ubuntu1.22.04.1]
cmake/jammy-updates 3.22.1-1ubuntu1.22.04.2 armhf [upgradable from: 3.22.1-1ubuntu1.22.04.1]
coreutils/jammy-updates 8.32-4.1ubuntu1.2 armhf [upgradable from: 8.32-4.1ubuntu1]
curl/jammy-updates,jammy-security 7.81.0-1ubuntu1.20 armhf [upgradable from: 7.81.0-1ubuntu1.15]
distro-info-data/jammy-updates 0.52ubuntu0.8 all [upgradable from: 0.52ubuntu0.5]
dns-root-data/jammy-updates 2023112702~ubuntu0.22.04.1 all [upgradable from: 2021011101]
dnsmasq-base/jammy-updates,jammy-security 2.90-0ubuntu0.22.04.1 armhf [upgradable from: 2.86-1.1ubuntu0.3]
dpkg-dev/jammy-updates 1.21.1ubuntu2.3 all [upgradable from: 1.21.1ubuntu2.2]
dpkg/jammy-updates 1.21.1ubuntu2.3 armhf [upgradable from: 1.21.1ubuntu2.2]
e2fsprogs/jammy-updates 1.46.5-2ubuntu1.2 armhf [upgradable from: 1.46.5-2ubuntu1.1]
ethtool/jammy-updates 1:5.16-1ubuntu0.1 armhf [upgradable from: 1:5.16-1]
fdisk/jammy-updates,jammy-security 2.37.2-4ubuntu3.4 armhf [upgradable from: 2.37.2-4ubuntu3]
gdb/jammy-updates,jammy-security 12.1-0ubuntu1~22.04.2 armhf [upgradable from: 12.1-0ubuntu1~22.04]
git-man/jammy-updates,jammy-security 1:2.34.1-1ubuntu1.11 all [upgradable from: 1:2.34.1-1ubuntu1.10]
git/jammy-updates,jammy-security 1:2.34.1-1ubuntu1.11 armhf [upgradable from: 1:2.34.1-1ubuntu1.10]
gtk-update-icon-cache/jammy-updates,jammy-security 3.24.33-1ubuntu2.2 armhf [upgradable from: 3.24.33-1ubuntu2]
less/jammy-updates,jammy-security 590-1ubuntu0.22.04.3 armhf [upgradable from: 590-1ubuntu0.22.04.1]
libapparmor1/jammy-updates,jammy-security 3.0.4-2ubuntu2.4 armhf [upgradable from: 3.0.4-2ubuntu2.3]
libapt-pkg6.0/jammy-updates 2.4.13 armhf [upgradable from: 2.4.11]
libarchive13/jammy-updates,jammy-security 3.6.0-1ubuntu1.3 armhf [upgradable from: 3.6.0-1ubuntu1]
libbinutils/jammy-updates,jammy-security 2.38-4ubuntu2.6 armhf [upgradable from: 2.38-4ubuntu2.3]
libblkid1/jammy-updates,jammy-security 2.37.2-4ubuntu3.4 armhf [upgradable from: 2.37.2-4ubuntu3]
libbluetooth3/jammy-updates,jammy-security 5.64-0ubuntu1.3 armhf [upgradable from: 5.64-0ubuntu1.1]
libc-bin/jammy-updates,jammy-security 2.35-0ubuntu3.8 armhf [upgradable from: 2.35-0ubuntu3.4]
libcom-err2/jammy-updates 1.46.5-2ubuntu1.2 armhf [upgradable from: 1.46.5-2ubuntu1.1]
libcryptsetup12/jammy-updates 2:2.4.3-1ubuntu1.2 armhf [upgradable from: 2:2.4.3-1ubuntu1.1]
libctf-nobfd0/jammy-updates,jammy-security 2.38-4ubuntu2.6 armhf [upgradable from: 2.38-4ubuntu2.3]
libctf0/jammy-updates,jammy-security 2.38-4ubuntu2.6 armhf [upgradable from: 2.38-4ubuntu2.3]
libcups2/jammy-updates,jammy-security 2.4.1op1-1ubuntu4.11 armhf [upgradable from: 2.4.1op1-1ubuntu4.7]
libcurl3-gnutls/jammy-updates,jammy-security 7.81.0-1ubuntu1.20 armhf [upgradable from: 7.81.0-1ubuntu1.15]
libcurl4/jammy-updates,jammy-security 7.81.0-1ubuntu1.20 armhf [upgradable from: 7.81.0-1ubuntu1.15]
libdpkg-perl/jammy-updates 1.21.1ubuntu2.3 all [upgradable from: 1.21.1ubuntu2.2]
libexpat1-dev/jammy-updates,jammy-security 2.4.7-1ubuntu0.5 armhf [upgradable from: 2.4.7-1ubuntu0.2]
libexpat1/jammy-updates,jammy-security 2.4.7-1ubuntu0.5 armhf [upgradable from: 2.4.7-1ubuntu0.2]
libext2fs2/jammy-updates 1.46.5-2ubuntu1.2 armhf [upgradable from: 1.46.5-2ubuntu1.1]
libfdisk1/jammy-updates,jammy-security 2.37.2-4ubuntu3.4 armhf [upgradable from: 2.37.2-4ubuntu3]
libgbm1/jammy-updates 23.2.1-1ubuntu3.1~22.04.3 armhf [upgradable from: 23.0.4-0ubuntu1~22.04.1]
libgdk-pixbuf-2.0-0/jammy-updates,jammy-security 2.42.8+dfsg-1ubuntu0.3 armhf [upgradable from: 2.42.8+dfsg-1ubuntu0.2]
libgdk-pixbuf2.0-bin/jammy-updates,jammy-security 2.42.8+dfsg-1ubuntu0.3 armhf [upgradable from: 2.42.8+dfsg-1ubuntu0.2]
libgdk-pixbuf2.0-common/jammy-updates,jammy-security 2.42.8+dfsg-1ubuntu0.3 all [upgradable from: 2.42.8+dfsg-1ubuntu0.2]
libglib2.0-0/jammy-updates,jammy-security 2.72.4-0ubuntu2.4 armhf [upgradable from: 2.72.4-0ubuntu2.2]
libglib2.0-data/jammy-updates,jammy-security 2.72.4-0ubuntu2.4 all [upgradable from: 2.72.4-0ubuntu2.2]
libgnutls30/jammy-updates,jammy-security 3.7.3-4ubuntu1.5 armhf [upgradable from: 3.7.3-4ubuntu1.3]
libgssapi-krb5-2/jammy-updates,jammy-security 1.19.2-2ubuntu0.4 armhf [upgradable from: 1.19.2-2ubuntu0.3]
libgtk-3-0/jammy-updates,jammy-security 3.24.33-1ubuntu2.2 armhf [upgradable from: 3.24.33-1ubuntu2]
libgtk-3-bin/jammy-updates,jammy-security 3.24.33-1ubuntu2.2 armhf [upgradable from: 3.24.33-1ubuntu2]
libgtk-3-common/jammy-updates,jammy-security 3.24.33-1ubuntu2.2 all [upgradable from: 3.24.33-1ubuntu2]
libip4tc2/jammy-updates 1.8.7-1ubuntu5.2 armhf [upgradable from: 1.8.7-1ubuntu5.1]
libk5crypto3/jammy-updates,jammy-security 1.19.2-2ubuntu0.4 armhf [upgradable from: 1.19.2-2ubuntu0.3]
libkrb5-3/jammy-updates,jammy-security 1.19.2-2ubuntu0.4 armhf [upgradable from: 1.19.2-2ubuntu0.3]
libkrb5support0/jammy-updates,jammy-security 1.19.2-2ubuntu0.4 armhf [upgradable from: 1.19.2-2ubuntu0.3]
libldap-2.5-0/jammy-updates 2.5.18+dfsg-0ubuntu0.22.04.2 armhf [upgradable from: 2.5.16+dfsg-0ubuntu0.22.04.1]
libldap-common/jammy-updates 2.5.18+dfsg-0ubuntu0.22.04.2 all [upgradable from: 2.5.16+dfsg-0ubuntu0.22.04.1]
libmm-glib0/jammy-updates 1.20.0-1~ubuntu22.04.4 armhf [upgradable from: 1.20.0-1~ubuntu22.04.2]
libmount1/jammy-updates,jammy-security 2.37.2-4ubuntu3.4 armhf [upgradable from: 2.37.2-4ubuntu3]
libndp0/jammy-updates,jammy-security 1.8-0ubuntu3.1 armhf [upgradable from: 1.8-0ubuntu3]
libnetplan0/jammy-updates,jammy-security 0.106.1-7ubuntu0.22.04.4 armhf [upgradable from: 0.106.1-7ubuntu0.22.04.2]
libnghttp2-14/jammy-updates,jammy-security 1.43.0-1ubuntu0.2 armhf [upgradable from: 1.43.0-1ubuntu0.1]
libnss-systemd/jammy-updates 249.11-0ubuntu3.12 armhf [upgradable from: 249.11-0ubuntu3.11]
libopenjp2-7/jammy-updates,jammy-security 2.4.0-6ubuntu0.2 armhf [upgradable from: 2.4.0-6]
libpam-modules-bin/jammy-updates,jammy-security 1.4.0-11ubuntu2.4 armhf [upgradable from: 1.4.0-11ubuntu2.3]
libpam-modules/jammy-updates,jammy-security 1.4.0-11ubuntu2.4 armhf [upgradable from: 1.4.0-11ubuntu2.3]
libpam-runtime/jammy-updates,jammy-security 1.4.0-11ubuntu2.4 all [upgradable from: 1.4.0-11ubuntu2.3]
libpam-systemd/jammy-updates 249.11-0ubuntu3.12 armhf [upgradable from: 249.11-0ubuntu3.11]
libpam0g/jammy-updates,jammy-security 1.4.0-11ubuntu2.4 armhf [upgradable from: 1.4.0-11ubuntu2.3]
libpcap0.8/jammy-updates 1.10.1-4ubuntu1.22.04.1 armhf [upgradable from: 1.10.1-4build1]
libpulse0/jammy-updates 1:15.99.1+dfsg1-1ubuntu2.2 armhf [upgradable from: 1:15.99.1+dfsg1-1ubuntu2.1]
libpython3-dev/jammy-updates 3.10.6-1~22.04.1 armhf [upgradable from: 3.10.6-1~22.04]
libpython3-stdlib/jammy-updates 3.10.6-1~22.04.1 armhf [upgradable from: 3.10.6-1~22.04]
libpython3.10-dev/jammy-updates,jammy-security 3.10.12-1~22.04.7 armhf [upgradable from: 3.10.12-1~22.04.3]
libpython3.10-minimal/jammy-updates,jammy-security 3.10.12-1~22.04.7 armhf [upgradable from: 3.10.12-1~22.04.3]
libpython3.10-stdlib/jammy-updates,jammy-security 3.10.12-1~22.04.7 armhf [upgradable from: 3.10.12-1~22.04.3]
libpython3.10/jammy-updates,jammy-security 3.10.12-1~22.04.7 armhf [upgradable from: 3.10.12-1~22.04.3]
libsmartcols1/jammy-updates,jammy-security 2.37.2-4ubuntu3.4 armhf [upgradable from: 2.37.2-4ubuntu3]
libsqlite3-0/jammy-updates,jammy-security 3.37.2-2ubuntu0.3 armhf [upgradable from: 3.37.2-2ubuntu0.1]
libss2/jammy-updates 1.46.5-2ubuntu1.2 armhf [upgradable from: 1.46.5-2ubuntu1.1]
libssh-4/jammy-updates,jammy-security 0.9.6-2ubuntu0.22.04.3 armhf [upgradable from: 0.9.6-2ubuntu0.22.04.1]
libssl-dev/jammy-updates,jammy-security 3.0.2-0ubuntu1.18 armhf [upgradable from: 3.0.2-0ubuntu1.12]
libssl3/jammy-updates,jammy-security 3.0.2-0ubuntu1.18 armhf [upgradable from: 3.0.2-0ubuntu1.12]
libsystemd0/jammy-updates 249.11-0ubuntu3.12 armhf [upgradable from: 249.11-0ubuntu3.11]
libudev1/jammy-updates 249.11-0ubuntu3.12 armhf [upgradable from: 249.11-0ubuntu3.11]
libuuid1/jammy-updates,jammy-security 2.37.2-4ubuntu3.4 armhf [upgradable from: 2.37.2-4ubuntu3]
libuv1/jammy-updates,jammy-security 1.43.0-1ubuntu0.1 armhf [upgradable from: 1.43.0-1]
libvpx7/jammy-updates,jammy-security 1.11.0-2ubuntu2.3 armhf [upgradable from: 1.11.0-2ubuntu2.2]
libxml2/jammy-updates,jammy-security 2.9.13+dfsg-1ubuntu0.4 armhf [upgradable from: 2.9.13+dfsg-1ubuntu0.3]
libxtables12/jammy-updates 1.8.7-1ubuntu5.2 armhf [upgradable from: 1.8.7-1ubuntu5.1]
login/jammy-updates,jammy-security 1:4.8.1-2ubuntu2.2 armhf [upgradable from: 1:4.8.1-2ubuntu2.1]
logsave/jammy-updates 1.46.5-2ubuntu1.2 armhf [upgradable from: 1.46.5-2ubuntu1.1]
mesa-va-drivers/jammy-updates 23.2.1-1ubuntu3.1~22.04.3 armhf [upgradable from: 23.0.4-0ubuntu1~22.04.1]
mesa-vdpau-drivers/jammy-updates 23.2.1-1ubuntu3.1~22.04.3 armhf [upgradable from: 23.0.4-0ubuntu1~22.04.1]
modemmanager/jammy-updates 1.20.0-1~ubuntu22.04.4 armhf [upgradable from: 1.20.0-1~ubuntu22.04.2]
mount/jammy-updates,jammy-security 2.37.2-4ubuntu3.4 armhf [upgradable from: 2.37.2-4ubuntu3]
nano/jammy-updates,jammy-security 6.2-1ubuntu0.1 armhf [upgradable from: 6.2-1]
netplan.io/jammy-updates,jammy-security 0.106.1-7ubuntu0.22.04.4 armhf [upgradable from: 0.106.1-7ubuntu0.22.04.2]
openssh-client/jammy-updates,jammy-security 1:8.9p1-3ubuntu0.10 armhf [upgradable from: 1:8.9p1-3ubuntu0.4]
openssh-server/jammy-updates,jammy-security 1:8.9p1-3ubuntu0.10 armhf [upgradable from: 1:8.9p1-3ubuntu0.4]
openssh-sftp-server/jammy-updates,jammy-security 1:8.9p1-3ubuntu0.10 armhf [upgradable from: 1:8.9p1-3ubuntu0.4]
openssl/jammy-updates,jammy-security 3.0.2-0ubuntu1.18 armhf [upgradable from: 3.0.2-0ubuntu1.12]
passwd/jammy-updates,jammy-security 1:4.8.1-2ubuntu2.2 armhf [upgradable from: 1:4.8.1-2ubuntu2.1]
python3-dev/jammy-updates 3.10.6-1~22.04.1 armhf [upgradable from: 3.10.6-1~22.04]
python3-minimal/jammy-updates 3.10.6-1~22.04.1 armhf [upgradable from: 3.10.6-1~22.04]
python3-pip/jammy-updates,jammy-security 22.0.2+dfsg-1ubuntu0.5 all [upgradable from: 22.0.2+dfsg-1ubuntu0.4]
python3-pkg-resources/jammy-updates,jammy-security 59.6.0-1.2ubuntu0.22.04.2 all [upgradable from: 59.6.0-1.2ubuntu0.22.04.1]
python3-setuptools/jammy-updates,jammy-security 59.6.0-1.2ubuntu0.22.04.2 all [upgradable from: 59.6.0-1.2ubuntu0.22.04.1]
python3.10-dev/jammy-updates,jammy-security 3.10.12-1~22.04.7 armhf [upgradable from: 3.10.12-1~22.04.3]
python3.10-minimal/jammy-updates,jammy-security 3.10.12-1~22.04.7 armhf [upgradable from: 3.10.12-1~22.04.3]
python3.10/jammy-updates,jammy-security 3.10.12-1~22.04.7 armhf [upgradable from: 3.10.12-1~22.04.3]
python3/jammy-updates 3.10.6-1~22.04.1 armhf [upgradable from: 3.10.6-1~22.04]
systemd-hwe-hwdb/jammy-updates 249.11.5 all [upgradable from: 249.11.3]
systemd-sysv/jammy-updates 249.11-0ubuntu3.12 armhf [upgradable from: 249.11-0ubuntu3.11]
systemd/jammy-updates 249.11-0ubuntu3.12 armhf [upgradable from: 249.11-0ubuntu3.11]
tar/jammy-updates,jammy-security 1.34+dfsg-1ubuntu0.1.22.04.2 armhf [upgradable from: 1.34+dfsg-1ubuntu0.1.22.04.1]
tcpdump/jammy-updates 4.99.1-3ubuntu0.2 armhf [upgradable from: 4.99.1-3ubuntu0.1]
tzdata/jammy-updates 2024a-0ubuntu0.22.04.1 all [upgradable from: 2023c-0ubuntu0.22.04.2]
udev/jammy-updates 249.11-0ubuntu3.12 armhf [upgradable from: 249.11-0ubuntu3.11]
util-linux/jammy-updates,jammy-security 2.37.2-4ubuntu3.4 armhf [upgradable from: 2.37.2-4ubuntu3]
vim-common/jammy-updates,jammy-security 2:8.2.3995-1ubuntu2.21 all [upgradable from: 2:8.2.3995-1ubuntu2.13]
vim-runtime/jammy-updates,jammy-security 2:8.2.3995-1ubuntu2.21 all [upgradable from: 2:8.2.3995-1ubuntu2.13]
vim/jammy-updates,jammy-security 2:8.2.3995-1ubuntu2.21 armhf [upgradable from: 2:8.2.3995-1ubuntu2.13]
vsftpd/jammy-updates 3.0.5-0ubuntu1.1 armhf [upgradable from: 3.0.5-0ubuntu1]
wget/jammy-updates,jammy-security 1.21.2-2ubuntu1.1 armhf [upgradable from: 1.21.2-2ubuntu1]
wpasupplicant/jammy-updates,jammy-security 2:2.10-6ubuntu2.1 armhf [upgradable from: 2:2.10-6ubuntu2]
xxd/jammy-updates,jammy-security 2:8.2.3995-1ubuntu2.21 armhf [upgradable from: 2:8.2.3995-1ubuntu2.13]
pico@luckfox:~$ sudo apt install mc
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following additional packages will be installed:
file libssh2-1 mailcap mc-data mime-support unzip
Suggested packages:
arj catdvi | texlive-binaries dbview djvulibre-bin epub-utils genisoimage gv imagemagick libaspell-dev links | w3m | lynx odt2txt poppler-utils python python-boto python-tz unar wimtools xpdf | pdf-viewer zip
The following NEW packages will be installed:
file libssh2-1 mailcap mc mc-data mime-support unzip
0 upgraded, 7 newly installed, 0 to remove and 133 not upgraded.
8 not fully installed or removed.
Need to get 0 B/2212 kB of archives.
After this operation, 8124 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up libc6:armhf (2.35-0ubuntu3.8) ...
Selecting previously unselected package file.
(Reading database ... 48134 files and directories currently installed.)
Preparing to unpack .../0-file_1%3a5.41-3ubuntu0.1_armhf.deb ...
Unpacking file (1:5.41-3ubuntu0.1) ...
Selecting previously unselected package libssh2-1:armhf.
Preparing to unpack .../1-libssh2-1_1.10.0-3_armhf.deb ...
Unpacking libssh2-1:armhf (1.10.0-3) ...
Selecting previously unselected package mailcap.
Preparing to unpack .../2-mailcap_3.70+nmu1ubuntu1_all.deb ...
Unpacking mailcap (3.70+nmu1ubuntu1) ...
Selecting previously unselected package mc-data.
Preparing to unpack .../3-mc-data_3%3a4.8.27-1_all.deb ...
Unpacking mc-data (3:4.8.27-1) ...
Selecting previously unselected package mc.
Preparing to unpack .../4-mc_3%3a4.8.27-1_armhf.deb ...
Unpacking mc (3:4.8.27-1) ...
Selecting previously unselected package mime-support.
Preparing to unpack .../5-mime-support_3.66_all.deb ...
Unpacking mime-support (3.66) ...
Selecting previously unselected package unzip.
Preparing to unpack .../6-unzip_6.0-26ubuntu3.2_armhf.deb ...
Unpacking unzip (6.0-26ubuntu3.2) ...
Setting up unzip (6.0-26ubuntu3.2) ...
Setting up linux-libc-dev:armhf (5.15.0-130.140) ...
Setting up file (1:5.41-3ubuntu0.1) ...
Setting up libc6-dbg:armhf (2.35-0ubuntu3.8) ...
Setting up mc-data (3:4.8.27-1) ...
Setting up libssh2-1:armhf (1.10.0-3) ...
Setting up libtiff5:armhf (4.3.0-6ubuntu0.10) ...
Setting up libc-dev-bin (2.35-0ubuntu3.8) ...
Setting up mailcap (3.70+nmu1ubuntu1) ...
Setting up mime-support (3.66) ...
Setting up mc (3:4.8.27-1) ...
Setting up libgd3:armhf (2.3.0-2ubuntu2.3) ...
Setting up libc6-dev:armhf (2.35-0ubuntu3.8) ...
Setting up libc-devtools (2.35-0ubuntu3.8) ...
Processing triggers for libc-bin (2.35-0ubuntu3.4) ...
Processing triggers for hicolor-icon-theme (0.17-2) ...
pico@luckfox:~$ mc
pico@luckfox:~$ sudo apt upgrade
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
The following NEW packages will be installed:
libxcb-randr0
The following packages will be upgraded:
alsa-ucm-conf apt apt-utils base-files bash binutils binutils-arm-linux-gnueabihf binutils-common bsdutils ca-certificates cmake cmake-data coreutils curl distro-info-data dns-root-data dnsmasq-base dpkg dpkg-dev e2fsprogs ethtool fdisk gdb git
git-man gtk-update-icon-cache less libapparmor1 libapt-pkg6.0 libarchive13 libbinutils libblkid1 libbluetooth3 libc-bin libcom-err2 libcryptsetup12 libctf-nobfd0 libctf0 libcups2 libcurl3-gnutls libcurl4 libdpkg-perl libexpat1 libexpat1-dev
libext2fs2 libfdisk1 libgbm1 libgdk-pixbuf-2.0-0 libgdk-pixbuf2.0-bin libgdk-pixbuf2.0-common libglib2.0-0 libglib2.0-data libgnutls30 libgssapi-krb5-2 libgtk-3-0 libgtk-3-bin libgtk-3-common libip4tc2 libk5crypto3 libkrb5-3 libkrb5support0
libldap-2.5-0 libldap-common libmm-glib0 libmount1 libndp0 libnetplan0 libnghttp2-14 libnss-systemd libopenjp2-7 libpam-modules libpam-modules-bin libpam-runtime libpam-systemd libpam0g libpcap0.8 libpulse0 libpython3-dev libpython3-stdlib
libpython3.10 libpython3.10-dev libpython3.10-minimal libpython3.10-stdlib libsmartcols1 libsqlite3-0 libss2 libssh-4 libssl-dev libssl3 libsystemd0 libudev1 libuuid1 libuv1 libvpx7 libxml2 libxtables12 login logsave mesa-va-drivers
mesa-vdpau-drivers modemmanager mount nano netplan.io openssh-client openssh-server openssh-sftp-server openssl passwd python3 python3-dev python3-minimal python3-pip python3-pkg-resources python3-setuptools python3.10 python3.10-dev
python3.10-minimal systemd systemd-hwe-hwdb systemd-sysv tar tcpdump tzdata udev util-linux vim vim-common vim-runtime vsftpd wget wpasupplicant xxd
133 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/88.1 MB of archives.
After this operation, 3191 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Extracting templates from packages: 100%
Preconfiguring packages ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../base-files_12ubuntu4.7_armhf.deb ...
Unpacking base-files (12ubuntu4.7) over (12ubuntu4.4) ...
Setting up base-files (12ubuntu4.7) ...
Configuration file '/etc/issue'
==> Modified (by you or by a script) since installation.
==> Package distributor has shipped an updated version.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** issue (Y/I/N/O/D/Z) [default=N] ?
Configuration file '/etc/issue.net'
==> Modified (by you or by a script) since installation.
==> Package distributor has shipped an updated version.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** issue.net (Y/I/N/O/D/Z) [default=N] ?
Installing new version of config file /etc/lsb-release ...
Configuration file '/etc/update-motd.d/10-help-text'
==> Modified (by you or by a script) since installation.
==> Package distributor has shipped an updated version.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** 10-help-text (Y/I/N/O/D/Z) [default=N] ?
motd-news.service is a disabled or a static unit not running, not starting it.
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../bash_5.1-6ubuntu1.1_armhf.deb ...
Unpacking bash (5.1-6ubuntu1.1) over (5.1-6ubuntu1) ...
Setting up bash (5.1-6ubuntu1.1) ...
update-alternatives: error: alternative path /usr/share/man/man7/bash-builtins.7.gz doesn't exist
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../bsdutils_1%3a2.37.2-4ubuntu3.4_armhf.deb ...
Unpacking bsdutils (1:2.37.2-4ubuntu3.4) over (1:2.37.2-4ubuntu3) ...
Setting up bsdutils (1:2.37.2-4ubuntu3.4) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../coreutils_8.32-4.1ubuntu1.2_armhf.deb ...
Unpacking coreutils (8.32-4.1ubuntu1.2) over (8.32-4.1ubuntu1) ...
Setting up coreutils (8.32-4.1ubuntu1.2) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../libsystemd0_249.11-0ubuntu3.12_armhf.deb ...
Unpacking libsystemd0:armhf (249.11-0ubuntu3.12) over (249.11-0ubuntu3.11) ...
Setting up libsystemd0:armhf (249.11-0ubuntu3.12) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../0-systemd-sysv_249.11-0ubuntu3.12_armhf.deb ...
Unpacking systemd-sysv (249.11-0ubuntu3.12) over (249.11-0ubuntu3.11) ...
Preparing to unpack .../1-libnss-systemd_249.11-0ubuntu3.12_armhf.deb ...
Unpacking libnss-systemd:armhf (249.11-0ubuntu3.12) over (249.11-0ubuntu3.11) ...
Preparing to unpack .../2-libpam-systemd_249.11-0ubuntu3.12_armhf.deb ...
Unpacking libpam-systemd:armhf (249.11-0ubuntu3.12) over (249.11-0ubuntu3.11) ...
Preparing to unpack .../3-systemd_249.11-0ubuntu3.12_armhf.deb ...
Unpacking systemd (249.11-0ubuntu3.12) over (249.11-0ubuntu3.11) ...
Preparing to unpack .../4-udev_249.11-0ubuntu3.12_armhf.deb ...
Unpacking udev (249.11-0ubuntu3.12) over (249.11-0ubuntu3.11) ...
Preparing to unpack .../5-libudev1_249.11-0ubuntu3.12_armhf.deb ...
Unpacking libudev1:armhf (249.11-0ubuntu3.12) over (249.11-0ubuntu3.11) ...
Setting up libudev1:armhf (249.11-0ubuntu3.12) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../libblkid1_2.37.2-4ubuntu3.4_armhf.deb ...
Unpacking libblkid1:armhf (2.37.2-4ubuntu3.4) over (2.37.2-4ubuntu3) ...
Setting up libblkid1:armhf (2.37.2-4ubuntu3.4) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../login_1%3a4.8.1-2ubuntu2.2_armhf.deb ...
Unpacking login (1:4.8.1-2ubuntu2.2) over (1:4.8.1-2ubuntu2.1) ...
Setting up login (1:4.8.1-2ubuntu2.2) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../util-linux_2.37.2-4ubuntu3.4_armhf.deb ...
Unpacking util-linux (2.37.2-4ubuntu3.4) over (2.37.2-4ubuntu3) ...
Setting up util-linux (2.37.2-4ubuntu3.4) ...
fstrim.service is a disabled or a static unit not running, not starting it.
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../libpam0g_1.4.0-11ubuntu2.4_armhf.deb ...
Unpacking libpam0g:armhf (1.4.0-11ubuntu2.4) over (1.4.0-11ubuntu2.3) ...
Setting up libpam0g:armhf (1.4.0-11ubuntu2.4) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../libpam-modules-bin_1.4.0-11ubuntu2.4_armhf.deb ...
Unpacking libpam-modules-bin (1.4.0-11ubuntu2.4) over (1.4.0-11ubuntu2.3) ...
Setting up libpam-modules-bin (1.4.0-11ubuntu2.4) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../libpam-modules_1.4.0-11ubuntu2.4_armhf.deb ...
Unpacking libpam-modules:armhf (1.4.0-11ubuntu2.4) over (1.4.0-11ubuntu2.3) ...
Setting up libpam-modules:armhf (1.4.0-11ubuntu2.4) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../libpam-runtime_1.4.0-11ubuntu2.4_all.deb ...
Unpacking libpam-runtime (1.4.0-11ubuntu2.4) over (1.4.0-11ubuntu2.3) ...
Setting up libpam-runtime (1.4.0-11ubuntu2.4) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../libapparmor1_3.0.4-2ubuntu2.4_armhf.deb ...
Unpacking libapparmor1:armhf (3.0.4-2ubuntu2.4) over (3.0.4-2ubuntu2.3) ...
Preparing to unpack .../libssl-dev_3.0.2-0ubuntu1.18_armhf.deb ...
Unpacking libssl-dev:armhf (3.0.2-0ubuntu1.18) over (3.0.2-0ubuntu1.12) ...
Preparing to unpack .../libssl3_3.0.2-0ubuntu1.18_armhf.deb ...
Unpacking libssl3:armhf (3.0.2-0ubuntu1.18) over (3.0.2-0ubuntu1.12) ...
Setting up libssl3:armhf (3.0.2-0ubuntu1.18) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../libuuid1_2.37.2-4ubuntu3.4_armhf.deb ...
Unpacking libuuid1:armhf (2.37.2-4ubuntu3.4) over (2.37.2-4ubuntu3) ...
Setting up libuuid1:armhf (2.37.2-4ubuntu3.4) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../libcryptsetup12_2%3a2.4.3-1ubuntu1.2_armhf.deb ...
Unpacking libcryptsetup12:armhf (2:2.4.3-1ubuntu1.2) over (2:2.4.3-1ubuntu1.1) ...
Preparing to unpack .../libgnutls30_3.7.3-4ubuntu1.5_armhf.deb ...
Unpacking libgnutls30:armhf (3.7.3-4ubuntu1.5) over (3.7.3-4ubuntu1.3) ...
Setting up libgnutls30:armhf (3.7.3-4ubuntu1.5) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../libip4tc2_1.8.7-1ubuntu5.2_armhf.deb ...
Unpacking libip4tc2:armhf (1.8.7-1ubuntu5.2) over (1.8.7-1ubuntu5.1) ...
Preparing to unpack .../libmount1_2.37.2-4ubuntu3.4_armhf.deb ...
Unpacking libmount1:armhf (2.37.2-4ubuntu3.4) over (2.37.2-4ubuntu3) ...
Setting up libmount1:armhf (2.37.2-4ubuntu3.4) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../mount_2.37.2-4ubuntu3.4_armhf.deb ...
Unpacking mount (2.37.2-4ubuntu3.4) over (2.37.2-4ubuntu3) ...
Preparing to unpack .../libapt-pkg6.0_2.4.13_armhf.deb ...
Unpacking libapt-pkg6.0:armhf (2.4.13) over (2.4.11) ...
Setting up libapt-pkg6.0:armhf (2.4.13) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../tar_1.34+dfsg-1ubuntu0.1.22.04.2_armhf.deb ...
Unpacking tar (1.34+dfsg-1ubuntu0.1.22.04.2) over (1.34+dfsg-1ubuntu0.1.22.04.1) ...
Setting up tar (1.34+dfsg-1ubuntu0.1.22.04.2) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../dpkg_1.21.1ubuntu2.3_armhf.deb ...
Unpacking dpkg (1.21.1ubuntu2.3) over (1.21.1ubuntu2.2) ...
Setting up dpkg (1.21.1ubuntu2.3) ...
dpkg-db-backup.service is a disabled or a static unit not running, not starting it.
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../libc-bin_2.35-0ubuntu3.8_armhf.deb ...
Unpacking libc-bin (2.35-0ubuntu3.8) over (2.35-0ubuntu3.4) ...
Setting up libc-bin (2.35-0ubuntu3.8) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../archives/apt_2.4.13_armhf.deb ...
Unpacking apt (2.4.13) over (2.4.11) ...
Setting up apt (2.4.13) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../apt-utils_2.4.13_armhf.deb ...
Unpacking apt-utils (2.4.13) over (2.4.11) ...
Preparing to unpack .../logsave_1.46.5-2ubuntu1.2_armhf.deb ...
Unpacking logsave (1.46.5-2ubuntu1.2) over (1.46.5-2ubuntu1.1) ...
Preparing to unpack .../libext2fs2_1.46.5-2ubuntu1.2_armhf.deb ...
Unpacking libext2fs2:armhf (1.46.5-2ubuntu1.2) over (1.46.5-2ubuntu1.1) ...
Setting up libext2fs2:armhf (1.46.5-2ubuntu1.2) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../0-e2fsprogs_1.46.5-2ubuntu1.2_armhf.deb ...
Unpacking e2fsprogs (1.46.5-2ubuntu1.2) over (1.46.5-2ubuntu1.1) ...
Preparing to unpack .../1-python3.10-dev_3.10.12-1~22.04.7_armhf.deb ...
Unpacking python3.10-dev (3.10.12-1~22.04.7) over (3.10.12-1~22.04.3) ...
Preparing to unpack .../2-python3.10_3.10.12-1~22.04.7_armhf.deb ...
Unpacking python3.10 (3.10.12-1~22.04.7) over (3.10.12-1~22.04.3) ...
Preparing to unpack .../3-libpython3-dev_3.10.6-1~22.04.1_armhf.deb ...
Unpacking libpython3-dev:armhf (3.10.6-1~22.04.1) over (3.10.6-1~22.04) ...
Preparing to unpack .../4-python3-dev_3.10.6-1~22.04.1_armhf.deb ...
Unpacking python3-dev (3.10.6-1~22.04.1) over (3.10.6-1~22.04) ...
Preparing to unpack .../5-python3-minimal_3.10.6-1~22.04.1_armhf.deb ...
Unpacking python3-minimal (3.10.6-1~22.04.1) over (3.10.6-1~22.04) ...
Setting up python3-minimal (3.10.6-1~22.04.1) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../00-python3_3.10.6-1~22.04.1_armhf.deb ...
running python pre-rtupdate hooks for python3.10...
Unpacking python3 (3.10.6-1~22.04.1) over (3.10.6-1~22.04) ...
Preparing to unpack .../01-libexpat1-dev_2.4.7-1ubuntu0.5_armhf.deb ...
Unpacking libexpat1-dev:armhf (2.4.7-1ubuntu0.5) over (2.4.7-1ubuntu0.2) ...
Preparing to unpack .../02-libexpat1_2.4.7-1ubuntu0.5_armhf.deb ...
Unpacking libexpat1:armhf (2.4.7-1ubuntu0.5) over (2.4.7-1ubuntu0.2) ...
Preparing to unpack .../03-libpython3.10-dev_3.10.12-1~22.04.7_armhf.deb ...
Unpacking libpython3.10-dev:armhf (3.10.12-1~22.04.7) over (3.10.12-1~22.04.3) ...
Preparing to unpack .../04-libpython3.10_3.10.12-1~22.04.7_armhf.deb ...
Unpacking libpython3.10:armhf (3.10.12-1~22.04.7) over (3.10.12-1~22.04.3) ...
Preparing to unpack .../05-python3.10-minimal_3.10.12-1~22.04.7_armhf.deb ...
Unpacking python3.10-minimal (3.10.12-1~22.04.7) over (3.10.12-1~22.04.3) ...
Preparing to unpack .../06-libpython3.10-stdlib_3.10.12-1~22.04.7_armhf.deb ...
Unpacking libpython3.10-stdlib:armhf (3.10.12-1~22.04.7) over (3.10.12-1~22.04.3) ...
Preparing to unpack .../07-libpython3.10-minimal_3.10.12-1~22.04.7_armhf.deb ...
Unpacking libpython3.10-minimal:armhf (3.10.12-1~22.04.7) over (3.10.12-1~22.04.3) ...
Preparing to unpack .../08-libsqlite3-0_3.37.2-2ubuntu0.3_armhf.deb ...
Unpacking libsqlite3-0:armhf (3.37.2-2ubuntu0.3) over (3.37.2-2ubuntu0.1) ...
Preparing to unpack .../09-libpython3-stdlib_3.10.6-1~22.04.1_armhf.deb ...
Unpacking libpython3-stdlib:armhf (3.10.6-1~22.04.1) over (3.10.6-1~22.04) ...
Preparing to unpack .../10-libk5crypto3_1.19.2-2ubuntu0.4_armhf.deb ...
Unpacking libk5crypto3:armhf (1.19.2-2ubuntu0.4) over (1.19.2-2ubuntu0.3) ...
Setting up libk5crypto3:armhf (1.19.2-2ubuntu0.4) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../libkrb5support0_1.19.2-2ubuntu0.4_armhf.deb ...
Unpacking libkrb5support0:armhf (1.19.2-2ubuntu0.4) over (1.19.2-2ubuntu0.3) ...
Setting up libkrb5support0:armhf (1.19.2-2ubuntu0.4) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../libkrb5-3_1.19.2-2ubuntu0.4_armhf.deb ...
Unpacking libkrb5-3:armhf (1.19.2-2ubuntu0.4) over (1.19.2-2ubuntu0.3) ...
Setting up libkrb5-3:armhf (1.19.2-2ubuntu0.4) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../libgssapi-krb5-2_1.19.2-2ubuntu0.4_armhf.deb ...
Unpacking libgssapi-krb5-2:armhf (1.19.2-2ubuntu0.4) over (1.19.2-2ubuntu0.3) ...
Setting up libgssapi-krb5-2:armhf (1.19.2-2ubuntu0.4) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../libcom-err2_1.46.5-2ubuntu1.2_armhf.deb ...
Unpacking libcom-err2:armhf (1.46.5-2ubuntu1.2) over (1.46.5-2ubuntu1.1) ...
Setting up libcom-err2:armhf (1.46.5-2ubuntu1.2) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../0-libldap-2.5-0_2.5.18+dfsg-0ubuntu0.22.04.2_armhf.deb ...
Unpacking libldap-2.5-0:armhf (2.5.18+dfsg-0ubuntu0.22.04.2) over (2.5.16+dfsg-0ubuntu0.22.04.1) ...
Preparing to unpack .../1-libnghttp2-14_1.43.0-1ubuntu0.2_armhf.deb ...
Unpacking libnghttp2-14:armhf (1.43.0-1ubuntu0.2) over (1.43.0-1ubuntu0.1) ...
Preparing to unpack .../2-libssh-4_0.9.6-2ubuntu0.22.04.3_armhf.deb ...
Unpacking libssh-4:armhf (0.9.6-2ubuntu0.22.04.3) over (0.9.6-2ubuntu0.22.04.1) ...
Preparing to unpack .../3-libcurl3-gnutls_7.81.0-1ubuntu1.20_armhf.deb ...
Unpacking libcurl3-gnutls:armhf (7.81.0-1ubuntu1.20) over (7.81.0-1ubuntu1.15) ...
Preparing to unpack .../4-git-man_1%3a2.34.1-1ubuntu1.11_all.deb ...
Unpacking git-man (1:2.34.1-1ubuntu1.11) over (1:2.34.1-1ubuntu1.10) ...
Preparing to unpack .../5-git_1%3a2.34.1-1ubuntu1.11_armhf.deb ...
Unpacking git (1:2.34.1-1ubuntu1.11) over (1:2.34.1-1ubuntu1.10) ...
Preparing to unpack .../6-passwd_1%3a4.8.1-2ubuntu2.2_armhf.deb ...
Unpacking passwd (1:4.8.1-2ubuntu2.2) over (1:4.8.1-2ubuntu2.1) ...
Setting up passwd (1:4.8.1-2ubuntu2.2) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../openssh-sftp-server_1%3a8.9p1-3ubuntu0.10_armhf.deb ...
Unpacking openssh-sftp-server (1:8.9p1-3ubuntu0.10) over (1:8.9p1-3ubuntu0.4) ...
Preparing to unpack .../openssh-server_1%3a8.9p1-3ubuntu0.10_armhf.deb ...
Unpacking openssh-server (1:8.9p1-3ubuntu0.10) over (1:8.9p1-3ubuntu0.4) ...
Preparing to unpack .../openssh-client_1%3a8.9p1-3ubuntu0.10_armhf.deb ...
Unpacking openssh-client (1:8.9p1-3ubuntu0.10) over (1:8.9p1-3ubuntu0.4) ...
Preparing to unpack .../libsmartcols1_2.37.2-4ubuntu3.4_armhf.deb ...
Unpacking libsmartcols1:armhf (2.37.2-4ubuntu3.4) over (2.37.2-4ubuntu3) ...
Setting up libsmartcols1:armhf (2.37.2-4ubuntu3.4) ...
(Reading database ... 48577 files and directories currently installed.)
Preparing to unpack .../00-libss2_1.46.5-2ubuntu1.2_armhf.deb ...
Unpacking libss2:armhf (1.46.5-2ubuntu1.2) over (1.46.5-2ubuntu1.1) ...
Preparing to unpack .../01-openssl_3.0.2-0ubuntu1.18_armhf.deb ...
Unpacking openssl (3.0.2-0ubuntu1.18) over (3.0.2-0ubuntu1.12) ...
Preparing to unpack .../02-ca-certificates_20240203~22.04.1_all.deb ...
Unpacking ca-certificates (20240203~22.04.1) over (20230311ubuntu0.22.04.1) ...
Preparing to unpack .../03-distro-info-data_0.52ubuntu0.8_all.deb ...
Unpacking distro-info-data (0.52ubuntu0.8) over (0.52ubuntu0.5) ...
Preparing to unpack .../04-less_590-1ubuntu0.22.04.3_armhf.deb ...
Unpacking less (590-1ubuntu0.22.04.3) over (590-1ubuntu0.22.04.1) ...
Preparing to unpack .../05-libglib2.0-0_2.72.4-0ubuntu2.4_armhf.deb ...
Unpacking libglib2.0-0:armhf (2.72.4-0ubuntu2.4) over (2.72.4-0ubuntu2.2) ...
Preparing to unpack .../06-libglib2.0-data_2.72.4-0ubuntu2.4_all.deb ...
Unpacking libglib2.0-data (2.72.4-0ubuntu2.4) over (2.72.4-0ubuntu2.2) ...
Preparing to unpack .../07-netplan.io_0.106.1-7ubuntu0.22.04.4_armhf.deb ...
Unpacking netplan.io (0.106.1-7ubuntu0.22.04.4) over (0.106.1-7ubuntu0.22.04.2) ...
Preparing to unpack .../08-libnetplan0_0.106.1-7ubuntu0.22.04.4_armhf.deb ...
Unpacking libnetplan0:armhf (0.106.1-7ubuntu0.22.04.4) over (0.106.1-7ubuntu0.22.04.2) ...
Preparing to unpack .../09-libxml2_2.9.13+dfsg-1ubuntu0.4_armhf.deb ...
Unpacking libxml2:armhf (2.9.13+dfsg-1ubuntu0.4) over (2.9.13+dfsg-1ubuntu0.3) ...
Preparing to unpack .../10-libxtables12_1.8.7-1ubuntu5.2_armhf.deb ...
Unpacking libxtables12:armhf (1.8.7-1ubuntu5.2) over (1.8.7-1ubuntu5.1) ...
Preparing to unpack .../11-python3-setuptools_59.6.0-1.2ubuntu0.22.04.2_all.deb ...
Unpacking python3-setuptools (59.6.0-1.2ubuntu0.22.04.2) over (59.6.0-1.2ubuntu0.22.04.1) ...
Preparing to unpack .../12-python3-pkg-resources_59.6.0-1.2ubuntu0.22.04.2_all.deb ...
Unpacking python3-pkg-resources (59.6.0-1.2ubuntu0.22.04.2) over (59.6.0-1.2ubuntu0.22.04.1) ...
Preparing to unpack .../13-tzdata_2024a-0ubuntu0.22.04.1_all.deb ...
Unpacking tzdata (2024a-0ubuntu0.22.04.1) over (2023c-0ubuntu0.22.04.2) ...
Preparing to unpack .../14-xxd_2%3a8.2.3995-1ubuntu2.21_armhf.deb ...
Unpacking xxd (2:8.2.3995-1ubuntu2.21) over (2:8.2.3995-1ubuntu2.13) ...
Preparing to unpack .../15-vim_2%3a8.2.3995-1ubuntu2.21_armhf.deb ...
Unpacking vim (2:8.2.3995-1ubuntu2.21) over (2:8.2.3995-1ubuntu2.13) ...
Preparing to unpack .../16-vim-runtime_2%3a8.2.3995-1ubuntu2.21_all.deb ...
Unpacking vim-runtime (2:8.2.3995-1ubuntu2.21) over (2:8.2.3995-1ubuntu2.13) ...
Preparing to unpack .../17-vim-common_2%3a8.2.3995-1ubuntu2.21_all.deb ...
Unpacking vim-common (2:8.2.3995-1ubuntu2.21) over (2:8.2.3995-1ubuntu2.13) ...
Preparing to unpack .../18-libpcap0.8_1.10.1-4ubuntu1.22.04.1_armhf.deb ...
Unpacking libpcap0.8:armhf (1.10.1-4ubuntu1.22.04.1) over (1.10.1-4build1) ...
Preparing to unpack .../19-libuv1_1.43.0-1ubuntu0.1_armhf.deb ...
Unpacking libuv1:armhf (1.43.0-1ubuntu0.1) over (1.43.0-1) ...
Preparing to unpack .../20-nano_6.2-1ubuntu0.1_armhf.deb ...
Unpacking nano (6.2-1ubuntu0.1) over (6.2-1) ...
Preparing to unpack .../21-tcpdump_4.99.1-3ubuntu0.2_armhf.deb ...
Unpacking tcpdump (4.99.1-3ubuntu0.2) over (4.99.1-3ubuntu0.1) ...
Preparing to unpack .../22-wget_1.21.2-2ubuntu1.1_armhf.deb ...
Unpacking wget (1.21.2-2ubuntu1.1) over (1.21.2-2ubuntu1) ...
Preparing to unpack .../23-alsa-ucm-conf_1.2.6.3-1ubuntu1.12_all.deb ...
Unpacking alsa-ucm-conf (1.2.6.3-1ubuntu1.12) over (1.2.6.3-1ubuntu1.8) ...
Preparing to unpack .../24-libctf-nobfd0_2.38-4ubuntu2.6_armhf.deb ...
Unpacking libctf-nobfd0:armhf (2.38-4ubuntu2.6) over (2.38-4ubuntu2.3) ...
Preparing to unpack .../25-libctf0_2.38-4ubuntu2.6_armhf.deb ...
Unpacking libctf0:armhf (2.38-4ubuntu2.6) over (2.38-4ubuntu2.3) ...
Preparing to unpack .../26-libbinutils_2.38-4ubuntu2.6_armhf.deb ...
Unpacking libbinutils:armhf (2.38-4ubuntu2.6) over (2.38-4ubuntu2.3) ...
Preparing to unpack .../27-binutils-common_2.38-4ubuntu2.6_armhf.deb ...
Unpacking binutils-common:armhf (2.38-4ubuntu2.6) over (2.38-4ubuntu2.3) ...
Preparing to unpack .../28-binutils_2.38-4ubuntu2.6_armhf.deb ...
Unpacking binutils (2.38-4ubuntu2.6) over (2.38-4ubuntu2.3) ...
Preparing to unpack .../29-binutils-arm-linux-gnueabihf_2.38-4ubuntu2.6_armhf.deb ...
Unpacking binutils-arm-linux-gnueabihf (2.38-4ubuntu2.6) over (2.38-4ubuntu2.3) ...
Preparing to unpack .../30-libarchive13_3.6.0-1ubuntu1.3_armhf.deb ...
Unpacking libarchive13:armhf (3.6.0-1ubuntu1.3) over (3.6.0-1ubuntu1) ...
Preparing to unpack .../31-curl_7.81.0-1ubuntu1.20_armhf.deb ...
Unpacking curl (7.81.0-1ubuntu1.20) over (7.81.0-1ubuntu1.15) ...
Preparing to unpack .../32-libcurl4_7.81.0-1ubuntu1.20_armhf.deb ...
Unpacking libcurl4:armhf (7.81.0-1ubuntu1.20) over (7.81.0-1ubuntu1.15) ...
Preparing to unpack .../33-cmake_3.22.1-1ubuntu1.22.04.2_armhf.deb ...
Unpacking cmake (3.22.1-1ubuntu1.22.04.2) over (3.22.1-1ubuntu1.22.04.1) ...
Preparing to unpack .../34-cmake-data_3.22.1-1ubuntu1.22.04.2_all.deb ...
Unpacking cmake-data (3.22.1-1ubuntu1.22.04.2) over (3.22.1-1ubuntu1.22.04.1) ...
Preparing to unpack .../35-dns-root-data_2023112702~ubuntu0.22.04.1_all.deb ...
Unpacking dns-root-data (2023112702~ubuntu0.22.04.1) over (2021011101) ...
Preparing to unpack .../36-dnsmasq-base_2.90-0ubuntu0.22.04.1_armhf.deb ...
Unpacking dnsmasq-base (2.90-0ubuntu0.22.04.1) over (2.86-1.1ubuntu0.3) ...
Preparing to unpack .../37-dpkg-dev_1.21.1ubuntu2.3_all.deb ...
Unpacking dpkg-dev (1.21.1ubuntu2.3) over (1.21.1ubuntu2.2) ...
Preparing to unpack .../38-libdpkg-perl_1.21.1ubuntu2.3_all.deb ...
Unpacking libdpkg-perl (1.21.1ubuntu2.3) over (1.21.1ubuntu2.2) ...
Preparing to unpack .../39-ethtool_1%3a5.16-1ubuntu0.1_armhf.deb ...
Unpacking ethtool (1:5.16-1ubuntu0.1) over (1:5.16-1) ...
Preparing to unpack .../40-libfdisk1_2.37.2-4ubuntu3.4_armhf.deb ...
Unpacking libfdisk1:armhf (2.37.2-4ubuntu3.4) over (2.37.2-4ubuntu3) ...
Preparing to unpack .../41-fdisk_2.37.2-4ubuntu3.4_armhf.deb ...
Unpacking fdisk (2.37.2-4ubuntu3.4) over (2.37.2-4ubuntu3) ...
Preparing to unpack .../42-gdb_12.1-0ubuntu1~22.04.2_armhf.deb ...
Unpacking gdb (12.1-0ubuntu1~22.04.2) over (12.1-0ubuntu1~22.04) ...
Preparing to unpack .../43-libgdk-pixbuf2.0-common_2.42.8+dfsg-1ubuntu0.3_all.deb ...
Unpacking libgdk-pixbuf2.0-common (2.42.8+dfsg-1ubuntu0.3) over (2.42.8+dfsg-1ubuntu0.2) ...
Preparing to unpack .../44-libgdk-pixbuf-2.0-0_2.42.8+dfsg-1ubuntu0.3_armhf.deb ...
Unpacking libgdk-pixbuf-2.0-0:armhf (2.42.8+dfsg-1ubuntu0.3) over (2.42.8+dfsg-1ubuntu0.2) ...
Preparing to unpack .../45-gtk-update-icon-cache_3.24.33-1ubuntu2.2_armhf.deb ...
Unpacking gtk-update-icon-cache (3.24.33-1ubuntu2.2) over (3.24.33-1ubuntu2) ...
Preparing to unpack .../46-libbluetooth3_5.64-0ubuntu1.3_armhf.deb ...
Unpacking libbluetooth3:armhf (5.64-0ubuntu1.3) over (5.64-0ubuntu1.1) ...
Preparing to unpack .../47-libcups2_2.4.1op1-1ubuntu4.11_armhf.deb ...
Unpacking libcups2:armhf (2.4.1op1-1ubuntu4.11) over (2.4.1op1-1ubuntu4.7) ...
Selecting previously unselected package libxcb-randr0:armhf.
Preparing to unpack .../48-libxcb-randr0_1.14-3ubuntu3_armhf.deb ...
Unpacking libxcb-randr0:armhf (1.14-3ubuntu3) ...
Preparing to unpack .../49-libgbm1_23.2.1-1ubuntu3.1~22.04.3_armhf.deb ...
Unpacking libgbm1:armhf (23.2.1-1ubuntu3.1~22.04.3) over (23.0.4-0ubuntu1~22.04.1) ...
Preparing to unpack .../50-libgdk-pixbuf2.0-bin_2.42.8+dfsg-1ubuntu0.3_armhf.deb ...
Unpacking libgdk-pixbuf2.0-bin (2.42.8+dfsg-1ubuntu0.3) over (2.42.8+dfsg-1ubuntu0.2) ...
Preparing to unpack .../51-libgtk-3-common_3.24.33-1ubuntu2.2_all.deb ...
Unpacking libgtk-3-common (3.24.33-1ubuntu2.2) over (3.24.33-1ubuntu2) ...
Preparing to unpack .../52-libgtk-3-0_3.24.33-1ubuntu2.2_armhf.deb ...
Unpacking libgtk-3-0:armhf (3.24.33-1ubuntu2.2) over (3.24.33-1ubuntu2) ...
Preparing to unpack .../53-libgtk-3-bin_3.24.33-1ubuntu2.2_armhf.deb ...
Unpacking libgtk-3-bin (3.24.33-1ubuntu2.2) over (3.24.33-1ubuntu2) ...
Preparing to unpack .../54-libldap-common_2.5.18+dfsg-0ubuntu0.22.04.2_all.deb ...
Unpacking libldap-common (2.5.18+dfsg-0ubuntu0.22.04.2) over (2.5.16+dfsg-0ubuntu0.22.04.1) ...
Preparing to unpack .../55-libmm-glib0_1.20.0-1~ubuntu22.04.4_armhf.deb ...
Unpacking libmm-glib0:armhf (1.20.0-1~ubuntu22.04.4) over (1.20.0-1~ubuntu22.04.2) ...
Preparing to unpack .../56-libndp0_1.8-0ubuntu3.1_armhf.deb ...
Unpacking libndp0:armhf (1.8-0ubuntu3.1) over (1.8-0ubuntu3) ...
Preparing to unpack .../57-libpulse0_1%3a15.99.1+dfsg1-1ubuntu2.2_armhf.deb ...
Unpacking libpulse0:armhf (1:15.99.1+dfsg1-1ubuntu2.2) over (1:15.99.1+dfsg1-1ubuntu2.1) ...
Preparing to unpack .../58-libvpx7_1.11.0-2ubuntu2.3_armhf.deb ...
Unpacking libvpx7:armhf (1.11.0-2ubuntu2.3) over (1.11.0-2ubuntu2.2) ...
Preparing to unpack .../59-mesa-va-drivers_23.2.1-1ubuntu3.1~22.04.3_armhf.deb ...
Unpacking mesa-va-drivers:armhf (23.2.1-1ubuntu3.1~22.04.3) over (23.0.4-0ubuntu1~22.04.1) ...
Preparing to unpack .../60-mesa-vdpau-drivers_23.2.1-1ubuntu3.1~22.04.3_armhf.deb ...
Unpacking mesa-vdpau-drivers:armhf (23.2.1-1ubuntu3.1~22.04.3) over (23.0.4-0ubuntu1~22.04.1) ...
Preparing to unpack .../61-modemmanager_1.20.0-1~ubuntu22.04.4_armhf.deb ...
Unpacking modemmanager (1.20.0-1~ubuntu22.04.4) over (1.20.0-1~ubuntu22.04.2) ...
Preparing to unpack .../62-python3-pip_22.0.2+dfsg-1ubuntu0.5_all.deb ...
Unpacking python3-pip (22.0.2+dfsg-1ubuntu0.5) over (22.0.2+dfsg-1ubuntu0.4) ...
Preparing to unpack .../63-systemd-hwe-hwdb_249.11.5_all.deb ...
Unpacking systemd-hwe-hwdb (249.11.5) over (249.11.3) ...
Preparing to unpack .../64-wpasupplicant_2%3a2.10-6ubuntu2.1_armhf.deb ...
Unpacking wpasupplicant (2:2.10-6ubuntu2.1) over (2:2.10-6ubuntu2) ...
Preparing to unpack .../65-libopenjp2-7_2.4.0-6ubuntu0.2_armhf.deb ...
Unpacking libopenjp2-7:armhf (2.4.0-6ubuntu0.2) over (2.4.0-6) ...
Preparing to unpack .../66-vsftpd_3.0.5-0ubuntu1.1_armhf.deb ...
Unpacking vsftpd (3.0.5-0ubuntu1.1) over (3.0.5-0ubuntu1) ...
Setting up libip4tc2:armhf (1.8.7-1ubuntu5.2) ...
Setting up libexpat1:armhf (2.4.7-1ubuntu0.5) ...
Setting up mesa-vdpau-drivers:armhf (23.2.1-1ubuntu3.1~22.04.3) ...
Setting up libapparmor1:armhf (3.0.4-2ubuntu2.4) ...
Setting up apt-utils (2.4.13) ...
Setting up wget (1.21.2-2ubuntu1.1) ...
Setting up alsa-ucm-conf (1.2.6.3-1ubuntu1.12) ...
Setting up libpulse0:armhf (1:15.99.1+dfsg1-1ubuntu2.2) ...
Setting up libglib2.0-0:armhf (2.72.4-0ubuntu2.4) ...
Setting up distro-info-data (0.52ubuntu0.8) ...
Setting up openssh-client (1:8.9p1-3ubuntu0.10) ...
Setting up libsqlite3-0:armhf (3.37.2-2ubuntu0.3) ...
Setting up libgdk-pixbuf2.0-common (2.42.8+dfsg-1ubuntu0.3) ...
Setting up binutils-common:armhf (2.38-4ubuntu2.6) ...
Setting up libnghttp2-14:armhf (1.43.0-1ubuntu0.2) ...
Setting up less (590-1ubuntu0.22.04.3) ...
Setting up libctf-nobfd0:armhf (2.38-4ubuntu2.6) ...
Setting up libnetplan0:armhf (0.106.1-7ubuntu0.22.04.4) ...
Setting up dnsmasq-base (2.90-0ubuntu0.22.04.1) ...
Setting up libldap-common (2.5.18+dfsg-0ubuntu0.22.04.2) ...
Setting up libldap-2.5-0:armhf (2.5.18+dfsg-0ubuntu0.22.04.2) ...
Setting up xxd (2:8.2.3995-1ubuntu2.21) ...
Setting up dns-root-data (2023112702~ubuntu0.22.04.1) ...
Setting up tzdata (2024a-0ubuntu0.22.04.1) ...
Current default time zone: 'Asia/Shanghai'
Local time is now: Fri Jan 10 12:07:46 CST 2025.
Universal Time is now: Fri Jan 10 04:07:46 UTC 2025.
Run 'dpkg-reconfigure tzdata' if you wish to change it.
Setting up wpasupplicant (2:2.10-6ubuntu2.1) ...
Setting up libglib2.0-data (2.72.4-0ubuntu2.4) ...
Setting up libuv1:armhf (1.43.0-1ubuntu0.1) ...
Setting up vim-common (2:8.2.3995-1ubuntu2.21) ...
Setting up libexpat1-dev:armhf (2.4.7-1ubuntu0.5) ...
Setting up libpcap0.8:armhf (1.10.1-4ubuntu1.22.04.1) ...
Setting up libssl-dev:armhf (3.0.2-0ubuntu1.18) ...
Setting up udev (249.11-0ubuntu3.12) ...
Setting up libss2:armhf (1.46.5-2ubuntu1.2) ...
Setting up libpython3.10-minimal:armhf (3.10.12-1~22.04.7) ...
Setting up vsftpd (3.0.5-0ubuntu1.1) ...
vsftpd user (ftp) already exists, doing nothing.
vsftpd directory (/srv/ftp) already exists, doing nothing.
Setting up libxtables12:armhf (1.8.7-1ubuntu5.2) ...
Setting up libdpkg-perl (1.21.1ubuntu2.3) ...
Setting up logsave (1.46.5-2ubuntu1.2) ...
Setting up libssh-4:armhf (0.9.6-2ubuntu0.22.04.3) ...
Setting up libfdisk1:armhf (2.37.2-4ubuntu3.4) ...
Setting up systemd-hwe-hwdb (249.11.5) ...
Setting up libcups2:armhf (2.4.1op1-1ubuntu4.11) ...
Setting up nano (6.2-1ubuntu0.1) ...
Setting up mount (2.37.2-4ubuntu3.4) ...
Setting up libmm-glib0:armhf (1.20.0-1~ubuntu22.04.4) ...
Setting up libbluetooth3:armhf (5.64-0ubuntu1.3) ...
Setting up libxcb-randr0:armhf (1.14-3ubuntu3) ...
Setting up libcurl4:armhf (7.81.0-1ubuntu1.20) ...
Setting up libopenjp2-7:armhf (2.4.0-6ubuntu0.2) ...
Setting up git-man (1:2.34.1-1ubuntu1.11) ...
Setting up libcryptsetup12:armhf (2:2.4.3-1ubuntu1.2) ...
Setting up libgdk-pixbuf-2.0-0:armhf (2.42.8+dfsg-1ubuntu0.3) ...
Setting up libvpx7:armhf (1.11.0-2ubuntu2.3) ...
Setting up cmake-data (3.22.1-1ubuntu1.22.04.2) ...
Setting up curl (7.81.0-1ubuntu1.20) ...
Setting up modemmanager (1.20.0-1~ubuntu22.04.4) ...
Setting up mesa-va-drivers:armhf (23.2.1-1ubuntu3.1~22.04.3) ...
Setting up libndp0:armhf (1.8-0ubuntu3.1) ...
Setting up libbinutils:armhf (2.38-4ubuntu2.6) ...
Setting up vim-runtime (2:8.2.3995-1ubuntu2.21) ...
Setting up openssl (3.0.2-0ubuntu1.18) ...
Setting up libxml2:armhf (2.9.13+dfsg-1ubuntu0.4) ...
Setting up libgtk-3-common (3.24.33-1ubuntu2.2) ...
Setting up ethtool (1:5.16-1ubuntu0.1) ...
Setting up libctf0:armhf (2.38-4ubuntu2.6) ...
Setting up gtk-update-icon-cache (3.24.33-1ubuntu2.2) ...
Setting up openssh-sftp-server (1:8.9p1-3ubuntu0.10) ...
Setting up tcpdump (4.99.1-3ubuntu0.2) ...
Installing new version of config file /etc/apparmor.d/usr.bin.tcpdump ...
Setting up openssh-server (1:8.9p1-3ubuntu0.10) ...
rescue-ssh.target is a disabled or a static unit not running, not starting it.
ssh.socket is a disabled or a static unit not running, not starting it.
Setting up libgbm1:armhf (23.2.1-1ubuntu3.1~22.04.3) ...
Setting up libarchive13:armhf (3.6.0-1ubuntu1.3) ...
Setting up libgtk-3-0:armhf (3.24.33-1ubuntu2.2) ...
Setting up libgtk-3-bin (3.24.33-1ubuntu2.2) ...
Setting up e2fsprogs (1.46.5-2ubuntu1.2) ...
e2scrub_all.service is a disabled or a static unit not running, not starting it.
Setting up libcurl3-gnutls:armhf (7.81.0-1ubuntu1.20) ...
Setting up systemd (249.11-0ubuntu3.12) ...
Setting up python3.10-minimal (3.10.12-1~22.04.7) ...
Setting up fdisk (2.37.2-4ubuntu3.4) ...
Setting up libpython3.10-stdlib:armhf (3.10.12-1~22.04.7) ...
Setting up ca-certificates (20240203~22.04.1) ...
Updating certificates in /etc/ssl/certs...
rehash: warning: skipping ca-certificates.crt,it does not contain exactly one certificate or CRL
14 added, 5 removed; done.
Setting up git (1:2.34.1-1ubuntu1.11) ...
Setting up libgdk-pixbuf2.0-bin (2.42.8+dfsg-1ubuntu0.3) ...
Setting up cmake (3.22.1-1ubuntu1.22.04.2) ...
Setting up binutils-arm-linux-gnueabihf (2.38-4ubuntu2.6) ...
Setting up libpython3-stdlib:armhf (3.10.6-1~22.04.1) ...
Setting up libpython3.10:armhf (3.10.12-1~22.04.7) ...
Setting up systemd-sysv (249.11-0ubuntu3.12) ...
Setting up vim (2:8.2.3995-1ubuntu2.21) ...
Setting up python3.10 (3.10.12-1~22.04.7) ...
Setting up libnss-systemd:armhf (249.11-0ubuntu3.12) ...
Setting up python3 (3.10.6-1~22.04.1) ...
running python rtupdate hooks for python3.10...
running python post-rtupdate hooks for python3.10...
Setting up binutils (2.38-4ubuntu2.6) ...
Setting up dpkg-dev (1.21.1ubuntu2.3) ...
Setting up netplan.io (0.106.1-7ubuntu0.22.04.4) ...
Setting up gdb (12.1-0ubuntu1~22.04.2) ...
Setting up libpython3.10-dev:armhf (3.10.12-1~22.04.7) ...
Setting up python3.10-dev (3.10.12-1~22.04.7) ...
Setting up libpam-systemd:armhf (249.11-0ubuntu3.12) ...
Setting up python3-pkg-resources (59.6.0-1.2ubuntu0.22.04.2) ...
Setting up libpython3-dev:armhf (3.10.6-1~22.04.1) ...
Setting up python3-setuptools (59.6.0-1.2ubuntu0.22.04.2) ...
Setting up python3-dev (3.10.6-1~22.04.1) ...
Setting up python3-pip (22.0.2+dfsg-1ubuntu0.5) ...
Processing triggers for hicolor-icon-theme (0.17-2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.8) ...
Processing triggers for ntp (1:4.2.8p15+dfsg-1ubuntu2) ...
Processing triggers for dbus (1.12.20-2ubuntu4.1) ...
Processing triggers for mailcap (3.70+nmu1ubuntu1) ...
Processing triggers for ca-certificates (20240203~22.04.1) ...
Updating certificates in /etc/ssl/certs...
0 added, 0 removed; done.
Running hooks in /etc/ca-certificates/update.d...
done.
pico@luckfox:~$
Číňan nastavil IPv4 adresu dost zvláštním způsobem, v dalším článku se to pokusíme upravit a třeba dodělat IPv6.